Under run bars and tow bars

 

WAP

Approved under run bumpers, lift up under run bars and tow bars

We supply what we believe is the most comprehensive range of fully approved bumper bars in the UK.

Whether for a draw bar vehicle or rear mounted forklift, we trust you will find an off the shelf solution from us.

Next day delivery available on many types from stock, including fixed bar with or without tow ball fitting, and the very popular lift up universal under run.

mountings can be swapped between most types, so if it is in the list somewhere, you may be able have it.on yours

As with all WAP products, all of these are available with the option of hot galvanising, instead of the standard KTL finish.

All of our rear bumper bars are made by WAP in Germany, and are fully tested and approved

 

PDF drawings are listed with the picture of that type, this is only a selection of what we can do, if you require a specific dimension, or fitment, chances are it can be done,

 

 

In stock

WUF100SRK universal fixed under run bar. simply cut down to size (if needed) and drill through chassis holes, can be mounted from 30 to 90 degrees from chassis. In stock in black or galvanised

PDF drawing here

In stock

WUF100S fixed under run bar with short brackets (290 angles, drilled top), fits under draw beams with 60 or 65mm hole centers. In stock in black or galvanised

PDF drawing here

In stock

WUF100S-290 fixed under run bar with short brackets (290 angles, undrilled top) In stock in black or galvanised

PDF drawing here

In stock

NEW

WUF100S-370 universal under run bar with angle brackets 370mm long, mounts with one row of 3 bolts only, so can fit under chassis mounted equipment, tippers, etc. In stock in black or galvanised

PDF drawing here

In stock

NEW

WUF100S-525 universal under run bar with 525mm angle brackets . In stock in black or galvanised

PDF drawing here

In stock

NEW

WUF100S-800 universal under run bar with 800mm angle brackets . In stock in black or galvanised

PDF drawing here

In stock

SG2012

NEW

SG2012 Light carrying bumper bar only, finished in white powder coat,

PDF drawing here

In stock

SG2012-290

NEW

SG2012 Light carrying bumper bar finished in white powder coat, supplied with 290mm mounting angles in black or hot galvanised,

PDF drawing here

In stock

SG2012-370

NEW

SG2012 Light carrying bumper bar finished in white powder coat, supplied with 370mm mounting angles in black or hot galvanised,

PDF drawing here

In stock

SG2012-525

NEW

SG2012 Light carrying bumper bar finished in white powder coat, supplied with 525mm mounting angles in black or hot galvanised,

PDF drawing here

In stock

SG2012-800

NEW

SG2012 Light carrying bumper bar finished in white powder coat, supplied with 800mm mounting angles in black or hot galvanised,

PDF drawing here

In stock

WUB-ZKK A

Universal fixed under run with approved tow ball mounting point (tow ball not included), simply cut down to size (if needed) and drill through chassis holes, can be mounted from 30 to 90 degrees from chassis, 30.95kN (3.5t trailer on 32t truck) In stock in black or galvanised

(NEW ball and pin coupling now in stock, 30.95kN rating to match this tow bar, see listing below)

PDF drawing here

In stock

WUB-ZKK B

WUB-ZKK- B universal fixed under run with approved tow ball mounting point (tow ball not included), simple 3 bolt fixing. 30.95kN (3.5t trailer on 32t truck) 290mm angles with drilled top. In stock in black or galvanised

PDF drawing here

In stock

NEW

WUB-ZKK- B-290 universal fixed under run with approved tow ball mounting point (tow ball not included), simple 3 bolt fixing. 30.95kN (3.5t trailer on 32t truck) 290mm angles with undrilled top. In stock in black or galvanised

(NEW ball and pin coupling now in stock, 30.95kN rating to match this tow bar, see listing below).

PDF drawing here

In stock

NEW

WUB-ZKK- B-370 universal fixed under run with approved tow ball mounting point (tow ball not included), simple 3 bolt fixing. 30.95kN (3.5t trailer on 32t truck) 370mm angles with undrilled top. In stock in black or galvanised

(NEW ball and pin coupling now in stock, 30.95kN rating to match this tow bar, see listing below).

PDF drawing here

In stock

NEW

WUB-ZKK- B-525 universal fixed under run with approved tow ball mounting point (tow ball not included),. 30.95kN (3.5t trailer on 32t truck) 525mm angles with undrilled top. In stock in black or galvanised

(NEW ball and pin coupling now in stock, 30.95kN rating to match this tow bar, see listing below).

PDF drawing here

In stock

WUF105K gas strut assisted lift up under run bar, standard (650mm long) universal version, other leg lengths and mounting bolt options availible to order. In stock in black or galvanised

PDF drawing here

In stock

WUF105K-C parallelogram lift up under run with light carring bar (in white powder coat),the lights stay in use when lifted, the bar can also be used seperatly on fixed brackets (see SG2012)

PDF drawing of legs here,

PDF drawing of light bar here

NEW

WUF105K-L Lift up bar with adjustable length legs

PDF drawing here

WUF105K-MSK lift up under run bar with folding ends, suitable for trucks with both a mounted forklift and a draw bar coupling, all dimensions are variable (within limits), available to order, to your specifications.

PDF drawing here

WUF105-MSK-lights, folding under run bar for rear mounted fork lift truck, complete with intergrated lamp holders. Use with fixed or lifting options, many vriations, custom built to your needs to order.

PDF drawing here

 

WUF105-MSK folding bumper (shown with 800mm mounting angles) folding under run bar for rear mounted fork lift truck, too many fitting options to keep in stock, custom built to your needs to order.

PDF drawing here

 

WUF105K-removable ends. Lift up under run bar with removable ends, suitable for trucks with both a mounted forklift and a draw bar coupling, all dimensions are variable (within limits), available to order, to your specifications. Bar can also be used with WUF100SRK legs for fixed applications

PDF drawing here

WUF105KB folding under run bar for construction vehicles, many size variations on arms, custom built to order, some examples below

PDF drawing here

PDF drawing here

PDF drawing here

NEW

WUF105SF long reach under run bar, supplied to your specification, with round or square tube options. In stock in black, ready to cut to size

PDF drawing here

WUF100LV extending under run bar, up to 1.6m. Custom built to order.

PDF drawing here

Special sliding under run with tow ball fitting, an example of our custom solutions for your problems, built as a one off for a customer, came with TUV approval for under run and tow bar,

PDF drawing here

In stock

NEW

VDB208356 R55 approved ball and pin coupling, specially designed to complement the ZKK range of tow bars, 30.95kN rating means it is good for a 3.5t trailer on a 32t truck.

PDF drawing here

 

Approval certificates can be found here;

Transport Approval Docs.cfm

 

Fitting instructions can be found here;

Transport Fitting Docs.cfm